Xhorse Multi-PROG Multi Prog ECU TCU Programmer With GODIAG ECU GPT Boot AD and G-V ECU Cable For Read and Write VAG Gearbox

Product Highlights

Bundled Package Includes:

• Xhorse Multi Prog Pro-level ECU TCU Programmer
• GODIAG ECU GPT Boot AD ECU Connector
• GODIAG G-V ECU Cable

The GODIAG ECU GPT Adapter enables reading and writing ECU data without disassembling the ECU using the OBD2 Bench or GTP Bench method, or by disassembling the ECU and using the Boot method. This product includes a short-circuit-proof BOOT resistance board connection line to protect the ECU. It is compatible with J2534 devices and PCMFlash software.

Enables ECU reading and writing via Bench/Boot modes.

GODIAG G-V ECU Cable

The GODIAG G-V ECU Cable connects the Xhorse MULTI PROG with GT107 or GT107+ GPT BENCH BOOT to read and write data on VAG gearbox ECU and engine ECU, and to clone ECU.

Connection Diagrams

1. To read DQ200 with Xhorse MULTI PROG & GT107+
   
2. To read DQ250 with Xhorse MULTI PROG & GT107+
   
3. To read DQ200 with Xhorse MULTI PROG & GT107
   
4. To read DQ250 with Xhorse MULTI PROG & GT107
   
5. To read ME17.8.8 with Xhorse MULTI PROG & GODIAG ECU GPT Boot AD Programming Adapter
   
6. To read MED17.5 with Xhorse MULTI PROG & GODIAG ECU GPT Boot AD Programming Adapter
   

Requirements

Xhorse MULTI PROG

Supported ECU Models

For Volkswagen, Skoda, and Seat:

• TEMIC DQ200-MQB
• TEMIC DQ200-G2
• TEMIC DQ200Dxx
• TEMIC DQ250-MQB
• TEMIC DQ250Exx/Fxx
• CONTINENTAL DQ500
• BOSCH DQ380
• BOSCH DQ381
• TEMIC DQ400E

Xhorse Multi-Prog Programmer – Pro-level ECU TCU Programmer Highlights

1. Fully Replace VVDI Prog: Multi-Prog supports factory usage mode for batch programming of chips, enabling batch programming, offline programming, and file offline programming. Unlike VVDI PROG, Multi-Prog includes batch programming functionality.
2. Includes Free MQB48 License and BMW Bench Read ISN: When bound to an Xhorse VVDI2 or Key Tool Plus PAD account, the MQB48 function becomes available on those devices as well.
3. Read, Write, and Clone ECU
4. Read, Write, and Clone Gearbox TCU
5. Read EEPROM, ECU, and MCU
6. Read and Write Bosch ECU ISN with new Bosch ECU adapter
7. Supports Checksum correction for some EDC16/EDC17 ECUs (more to come)
8. Includes free BMW ISN read function and continuous updates for NEC, MPC, Infineon, and other chips
9. Built-in free MQB48 license. Bind Multi-Prog and VVDI2 (full version) or Key Tool Plus to the same Xhorse app account to use MQB48 NEC35XX function.
10. Free software and firmware updates provided regularly
11. NEW! Adds support for VAG MQB RH850 dashboard processor (requires extra Xhorse XDMPR8GL MQB-RH850/V850 Adapter)
12. Also compatible with Xhorse MQB Solder-free Adapters
13. Can work with Xhorse Multi-Prog Exclusive Adapters 4 in 1 to extend chip reading and writing capabilities
14. Xhorse Multi-Prog Free Software Download

Other Features

• Supports Read & Write for many chips including MC9S08 series, MC68HC(9)12 series, MC9S12 series, V850 series, H8X series, R8C series, PCF79XX series, and most EEPROM chips
• Supports chip data verify and checkblank functions
• Supports data file compare function
• Free Pin code calculation service by Dump for various models
• Supports Read and Write BMW N20, N55 ECU (shows ISN directly)
• Stable Read and Write for MC9S12XE series chips (5M48H/1N35H/2M53J/3M25J etc.)
• Supports renewing PCF79XX remote (currently supports BMW E/F series; PCF79XX adapter is optional)
• Features the largest database of connection diagrams
• Reserve ports available for future updates
• Supports repair of Porsche 12V lithium battery and BYD Lithium Battery (MC9S12XET256)
• Supports EDC17/MED17 data calculation (checksum correction)
• Supports third-party automatic HEX editing scripts
• Supports Expert mode: batch write chips (VVDI Prog only writes a single chip at a time)

GODIAG ECU GPT Boot Adapter Features

The GODIAG ECU GPT Boot AD programming adapter enables reading and writing ECU data without disassembling the ECU using the OBD2 Bench or GPT Bench method, or by disassembling the ECU and using the Boot method. It includes a short-circuit-proof BOOT resistance board connection line to protect the ECU and works with J2534 devices and PCMFlash software.

• ECU dedicated connection terminal
• Supports manual ignition power control
• ECU interface cable is labeled
• Supports ECU conversion to OBD2 mode to read and write data
• Supports RESET, BOOT, CNF1, GPT1, GPT2, 5V, 3.3V, VPP, GND
• Supports PCMFlash automatic control of ignition power supply
• Supports ECU opening BOOT method to read and write data
• CANbus equipped with a switch to freely select the 120Ω resistor
• Supports GPT to read and write data without disassembling the ECU
• Equipped with BOOT resistance board connecting cable [anti-lost resistor design]

GODIAG ECU GPT Boot Adapter Functions

• Diagnostic function supports standard OBD2 protocol equipment
• Supports ECU reading and writing data, and supports J2534 devices
• Only Scanmatik 2 PRO for PCMflash allows forming GPT1, GPT2 signals necessary to work with Module 71
• Other devices—Scanmatik OpenPort 2.0, Mongoose JLR, MongoosePro JLR, Teradyne GNA600 (VCM 1), Mazda VCM 2—support OBD2 or BOOT 53 mode to read and write ECU data

Package Includes

• 1pc x Multi-PROG
• 1pc x USB Cable
• 1pc x Power Adapter (15V 4A)
• 1pc x 220V Power Cord
• 1pc x VH13 Interface Adapter Board
• 1pc x VH20 Interface Adapter Board
• 1pc x VH23 Interface Adapter Board
• 1pc x MCU Adapter Multi-PROG Solder Cable
• 1pc x MCU DB15 Adapter Cable
• 1pc x ECU Adapter Multi-PROG Solder Cable
• 1pc x ECU DB15 Adapter Cable
• 1pc x Multi-PROG OBD Cable
• 1pc x USB WIFI Network Card
• 1pc x Product Manual
• 1pc x Certificate Of Conformity
• 43pcs x ECU Cable Plugs
• 1pc x GODIAG ECU GPT Boot AD Programming Adapter